Establishment and verification of a method for analyzing nasal blackheads images.

BACKGROUND: As people pay more attention to their skin health and the demand of developing skin care products for facial blackheads grows, the value of objective and efficient image recognition methods for blackheads is becoming more evident. Inspired by this current situation, this study attempted to analyze the number of blackheads of different severity automatically on the nose using an object recognition method on photographs of the nasal blackheads of subjects. METHOD: This study collected 350 subjects' facial photos in the laboratory environment, who aged 18-60, with blackhead symptoms in the nasal region. And expert assessment was used as a reference for machine learning to verify the performance of the nasal blackhead image recognition model through consistency and correlation analysis. RESULTS: The study concluded that the algorithm accuracy reached above 0.9, the model itself was effective, and the consistency between the model and the expert assessor assessment results was good, with the number of nasal blackheads, the count of blackheads of different severity, and the intra-group correlation coefficient ICC of blackhead severity all above 0.9, indicating that the deep learning-based assessment model had high overall performance and the evaluation results were comparable to those of the expert assessor. CONCLUSION: The recognition and analyzing model of nasal blackhead images provides a scientifically objective and accurate method for identifying the number and evaluating the severity of nasal blackheads. By using this model, the efficiency of evaluating nasal blackhead images in the cosmetics clinical trial will be improved. The assessment result of nasal blackheads will be objective and stable, and not only rely on the professional knowledge and clinical experience of assessors. The model can try to be applied in cosmetics efficacy testing and continuously optimized.

Anatomical and Ultrasonographic Analyses of the Levator Labii Superioris Alaeque Nasi Muscle at the Level of the Nasal Ala / Análisis Anatómico y Ecográfico del Músculo Elevador Nasolabial a Nivel del Ala Nasal

SUMMARY: We aimed to determine the width of the levator labii superioris alaeque nasi muscle (LLSAN) at the level of the nasal ala through cadaveric dissections and ultrasonography (US), to provide essential anatomical information for use during both invasive and noninvasive procedures in the nasal ala region. The LLSAN was investigated in the 40 hemifaces of 20 Korean cadavers, comprising 10 males and 10 females with a mean age of 73.6 years. The LLSAN width of the 40 specimens at the level of the midpoint of the nasal ala was 5.02±2.35 mm (mean±standard deviation), and ranged from 1.45 mm to 10.11 mm. The LLSAN widths were 5.96±2.36 mm and 3.93±1.89 mm in males and females, respectively, with ranges of 2.40-10.11 mm and 1.45-6.96 mm, respectively. The LLSAN widths on the left and right sides were 4.77±2.72 mm and 5.26±1.99 mm, respectively. The proportions of the LLSAN fibers inserting into the nasal ala and upper lip were similar in 13 specimens (32.5 %), while more fibers inserted into the nasal ala in 11 specimens (27.5 %) and more fibers inserted fibers of the LLSAN into the upper lip in 16 specimens (40 %). When clinicians need to target or avoid the LLSAN, the present width and range data can be helpful for ensuring the efficacy and safely of both invasive and noninvasive procedures. In addition, the possibility of asymmetry in the width of the LLSAN in the nasal ala region should be confirmed by US before performing such procedures.

Nuestro objetivo fue determinar el ancho del músculo elevador nasolabial (MENL) a nivel del ala nasal mediante disecciones cadavéricas y ecografía, para proporcionar información anatómica esencial, para su uso durante procedimientos invasivos y no invasivos, en la región del ala nasal. El MENL se estudió en 40 hemicaras de 20 cadáveres coreanos (10 hombres y 10 mujeres) con una edad media de 73,6 años. El ancho de MENL de las 40 muestras a nivel del punto medio del ala nasal fue de 5,02 ± 2,35 mm (media ± desviación estándar) y osciló entre 1,45 mm y 10,11 mm. Los anchos de MENL fueron 5,96 ± 2,36 mm y 3,93 ± 1,89 mm en hombres y mujeres, respectivamente, con rangos de 2,40 a 10,11 mm y 1,45 a 6,96 mm, respec- tivamente. Los anchos de MENL en los lados izquierdo y derecho fueron 4,77 ± 2,72 mm y 5,26 ± 1,99 mm, respectivamente. Las proporciones de fibras de MENL que se insertaban en el ala nasal y en el labio superior fueron similares en 13 muestras (32,5 %), mientras que se insertaron más fibras en el ala nasal en 11 muestras (27,5 %) y además, se insertaron fibras de MENL en el labio superior en 16 ejemplares (40 %). Cuando los médicos necesitan apuntar o evitar el MENL, los datos actuales de ancho y rango pueden ser útiles para garantizar la eficacia y seguridad de los procedimientos, tanto invasivos como no invasivos. Además, la ecografía puede ser utilizada para confirmar una posible asimetría en el ancho del MENL en la región del ala nasal antes de realizar los procedimientos.

Comparison of microparticle transport and deposition in nasal cavity of three different age groups.

Objective: The nasal cavity effectively captures the particles present in inhaled air, thereby preventing harmful and toxic pollutants from reaching the lungs. This filtering ability of the nasal cavity can be effectively utilized for targeted nasal drug delivery applications. This study aims to understand the particle deposition patterns in three age groups: neonate, infant, and adult.Materials and methods: The CT scans are built using MIMICS 21.0, followed by CATIA V6 to generate a patient-specific airway model. Fluid flow is simulated using ANSYS FLUENT 2021 R2. Spherical monodisperse microparticles ranging from 2 to 60 µm and a density of 1100 kg/m3 are simulated at steady-state and sedentary inspiration conditions.Results: The highest nasal valve depositions for the neonate are 25% for 20 µm, for infants, 10% for 50 µm, 15% for adults, and 15% for 15 µm. At mid nasal region, deposition of 15% for 20 µm is observed for infant and 8% for neonate and adult nasal cavities at a particle size of 10 and 20 µm, respectively. The highest particle deposition at the olfactory region is about 2.7% for the adult nasal cavity for 20 µm, and it is <1% for neonate and infant nasal cavities.Discussion and conclusions: The study of preferred nasal depositions during natural sedentary breathing conditions is utilized to determine the size that allows medication particles to be targeted to specific nose regions.

Comparison of three-dimensional imaging of the nose using three different 3D-photography systems: an observational study.

BACKGROUND: New 3D technologies for superficial soft tissue changes, especially in plastic and reconstructive surgical procedures, can improve the planning and documentation of facial surgeries. The purpose of this study was to compare and determine the applicability and feasibility of three different 3D-photography systems in clinical practice imaging the nose. METHODS: A total of 16 healthy non-operated noses were included in this prospective study. A plaster model of each nose was produced, digitized, and converted to a .stl mesh (= ground truth model). Three-dimensional images of each nose were then taken using Artec Space Spider (gold standard), Planmeca ProFace®, and the Bellus3D Dental Pro application. All resulting .stl files were aligned to the ground truth model using MeshLab software, and the root mean square error (RMSE), mean surface distance (MSD), and Hausdorff distance (HD) were calculated. RESULTS: The Artec Space Spider 3D-photography system showed significantly better results compared to the two other systems in regard to RMSE, MSD, and HD (each p < 0.001). There was no significant difference between Planmeca ProFace® and Bellus3D Dental Pro in terms of RMSE, MSD, and HD. Overall, all three camera systems showed a clinically acceptable deviation to the reference model (range: -1.23-1.57 mm). CONCLUSIONS: The three evaluated 3D-photography systems were suitable for nose imaging in the clinical routine. While Artec Space Spider showed the highest accuracy, the Bellus3D Dental Pro app may be the most feasible option for everyday clinical use due to its portability, ease of use, and low cost. This study presents three different systems, allowing readers to extrapolate to other systems when planning to introduce 3D photography in the clinical routine.

Ultrasound assessment of the nose vasculature: A review of the common method of non-surgical filler-based rhinoplasty.

BACKGROUND: With the increasing use of dermal injectable fillers in aesthetic medicine, the popularity of non-surgical filler-based rhinoplasty (NSR) is also growing. While performing this procedure might result in certain vascular complications, injecting deep into the midline of the nose is commonly considered the safest method for blind primary NSR. AIMS: In this study, we challenged the common NSR method with a Doppler ultrasound study of the nose. PATIENTS/METHODS: The vascular pattern of the common zones of the NSR procedure (radix and nasal tip) of 21 Iranian women were investigated by using a 14 MHz Doppler handheld ultrasound device (Silarious L14PS). Participants had never undergone any procedure on their nose. We focused on the depth of midline vessels in the radix and nasal tip. The radix was studied sagittally and horizontally, and the nasal tip was examined axially by ultrasound. RESULTS: In the radix of eight cases (38%), at least one vessel was observed at midline, and all were superficial. In the nose tip of 18 cases (86%), at least one vessel was observed at midline, and 9 out of these 18 vessels (50%) were deep. As a result, conducting NSR by the common method in our study population was relatively safe in the radix, but there was an increased likelihood of vascular events in the tip. CONCLUSION: Our research results show that while the common method of the NSR may carry a high risk of vascular events, the safety of this procedure could be enhanced by using ultrasound for planning and conducting a tailored treatment.

Regression analysis of nasal shape from juvenile to adult ages for forensic facial reconstruction.

The nose is a prominent feature for facial recognition and reconstruction. To investigate the relationship of the nasal shape with the piriform aperture in Korean adults and juveniles, we performed regression analysis. By regression analysis, prediction equations for nasal shape were obtained in relation to the shape of the piriform aperture considering sex and age groups. Three-dimensional skull and face models, rendered from computed tomography images, were assessed (331 males and 334 females). Juveniles (<20 years) were divided into three age groups according to the development of the dentition. Adults were divided into three age groups of two decades each, according to their age. To measure the nasal area, nine landmarks and nine measurements were chosen, while seven landmarks and five measurements were selected to measure the piriform aperture area. Four measurements were defined to explain the direct relationship between the nasal aperture and nasal shape. First, descriptive statistical analyses were performed according to sex and age groups. Subsequently, the correlation of nasal soft tissue measurements with piriform measurements was analyzed. Last, we performed a linear regression analysis of the measurements with higher correlations, considering sex and age groups as variables. Prediction equations were used to estimate the nasal bridge length, height, protrusion, and width. Equations considering sex and age groups showed better explanation ability. Measurements related to the height of the nasal bridge presented improvement. This study may assist in the more accurate approximation of nasal shape in facial reconstruction.

Crossing fibers may underlie the dynamic pulling forces of muscles that attach to cartilage at the tip of the nose.

The present study used microdissection, histology, and microcomputed tomography (micro-CT) with the aims of determining the prevalence and patterns of the depressor septi nasi (DSN) and orbicularis oris (OOr) muscles attached to the footplate of the medial crus (fMC) of the major alar cartilage, focusing on their crossing fibers. The DSN and OOr attached to the fMC of the major alar cartilage were investigated in 76 samples from 38 embalmed Korean adult cadavers (20 males, 18 females; mean age 70 years). The DSN, OOr, or both were attached to the fMC. When the DSN ran unilaterally or was absent, some OOr fibers ascended to attach to the fMC instead of the DSN in 20.6% of the samples. Crossing fibers of the DSN or OOr attached to the fMC were found in 82.4% of the samples. Bilateral and unilateral crossing fibers were found in 32.4% and 50.0%, respectively, and no crossing fibers were found in 17.6%. The DSN and OOr that attached to the fMC could be categorized into six types according to presence of the DSN and the crossing patterns of the DSN and OOr. Anatomical findings of the DSN and OOr that attached to the fMC were confirmed in histology and micro-CT images. These findings offer insights on anatomical mechanisms that may underlie the dynamic pulling forces generated by muscles that attach to the fMCs and on evolutionary variation observed in human facial expressions. They can also provide useful information for guiding rhinoplasty of the nasal tip.

Utilization of images and three-dimensional custom-made nostril retainer fabricate for patients with cleft lip and cleft lip nose deformities at Siriraj Hospital: preliminary phase.

A prospective study utilizing image analysis to assess nostril openings in post-operative patients with cleft lip and cleft lip nose deformities. This preliminary study seeks to employ two-dimensional (2D) images to fabricate a custom-made nostril retainer. This study was performed at Faculty of Medicine, Siriraj Hospital, Mahidol University, Thailand. This study included 30 healthy volunteers and 15 patients with cleft lip and cleft lip nose deformities. The nostril opening width and height for all participants were measured, and photographs were taken. An image analysis application was used to fabricate a three-dimensional (3D) custom-made nostril retainer. The mean differences between the direct measurements of the nostril aperture and the measurements obtained through the program did not exceed 2 mm in terms of nostril height, width, or columella. Two-dimensional photographs can be used to create a custom-made, three-dimensional nostril retainer. This retainer allows post-operative patients to maintain their nares without needing to visit the hospital, thereby reducing the cost of care.

Nasal Morphology as an Indicator of Maxillomandibular Skeletal Pattern.

OBJECTIVE: To determine the correlation of nasal morphology with maxillary and mandibular patterns. STUDY DESIGN: Descriptive cross-sectional study. Place and Duration of the Study: Department of Orthodontics, Liaquat College of Medicine and Dentistry and Qamar Dental Hospital, Karachi, Pakistan, , Liaquat College of Medicine & Dentistry and Darul Sehat Hospital Karachi, Pakistan from January to June, 2022. METHODOLOGY: The pre-treatment lateral cephalograms of 120 patients, aged 18-35 years were included in the study. Eleven nasal parameters were traced on lateral cephalograms and correlated with four maxillary and mandibular skeletal parameters by Pearson correlation coefficient test using SPSS version 26.0. RESULTS: Nasal bone length and nasal base angle showed a negative correlation with maxillary and mandibular position. Nasal upward tip angle was correlated positively with maxillary position whereas nasal tip angle was found to be negatively correlated with maxillary length. A negative correlation was observed between nasolabial angle and mandibular position. Nasal bone angle depicted a positive correlation with maxillary position and a negative correlation with jaw lengths and mandibular inclination. CONCLUSION: Nasal morphology has a strong correlation with maxillary as well as mandibular base lengths and position but not with inclination of the jaws. The acquaintance of the relationship of different nasal parameters with jaw parameters might be helpful in diagnosis and treatment planning and to attain the favourable treatment outcomes in patients undergoing orthodontic treatment, orthopedic interventions, orthognathic, genioplasty, rhinoplasty, profiloplasty and other procedures. KEY WORDS: Nasal morphology, Maxillomandibular skeletal pattern, Jaw length, Jaw position, Jaw inclination.

Volumetric assessment of the nose after primary unilateral cleft rhinoplasty using Laberge's technique.

BACKGROUND: There is a lack of standardized surgery for cleft rhinoplasty. We felt that the technique described by Dr Louise Caouette Laberge is an ideal way to approach this problem, thus we tried to quantify the outcome of surgery by volumetric assessment. MATERIAL AND METHOD: We recorded 3D images using an Artec scanner and performed volume calculations of the cleft side and noncleft side of the nose. These readings were taken once in the preoperative and then 2 weeks postoperative. Another scan of the face was performed 2 years after the surgery to compare the volumes of the cleft and noncleft side nostril. RESULTS: Of the 31 patients with unilateral cleft lip operated on (mean age 3-8 months), we found a significant increase in the cleft side volume at 3 weeks postoperative from 3.95 mm3 to 5.65 mm3 (p < 0.001 on paired t-test). A repeat scan done on the study population at 2 years postoperative found that the mean volume of the cleft side was 30.43 mm3 (standard deviation [SD], 2.49) and that of the normal side was 30.82 mm3 (SD, 2.51). An independent t-test found that there was no significant difference between the two volumes (p > 0.05) CONCLUSION: The use of volumetric data in the evaluation of postoperative outcomes provides an objective criterion for assessing the aesthetics as well as the growth. Our study concludes that the Laberge technique provides a good aesthetic outcome with minimal scarring for the management of cleft nose and lip with the anterior palate.

Three-dimensional reconstruction reveals the correlation between the extent of alveolar clefts and secondary nasal deformity in adults.

OBJECTIVES: This study aimed to explore the relationship between alveolar cleft and secondary nasal deformity post unilateral cleft lip repair in adults. METHODS: A total of 27 patients aged 16-30 years old with unilateral secondary nasal deformity and alveolar cleft were included, 13 of whom underwent bone grafting. Spiral CT data of all preoperative and postoperative patients who had alveolar bone grafting were collected. Then, Mimics software was used for three-dimensional reconstruction to evaluate the correlation between the width, height, and volume of the alveolar cleft and those of the nasal deformity. The difference in nasal deformity before and after alveolar bone grafting was also explored. RESULTS: The width of the alveolar cleft was positively correlated with the difference in bilateral nostril floor width (P<0.05). As the effective depth of the alveolar cleft increased, the sub-alare inclination angle largened (P<0.05). However, no significant difference was found in the nasal deformity between before and after alveolar bone grafting. CONCLUSIONS: Alveolar cleft is closely related to secondary nasal deformities post unilateral cleft lip repair, especially nasal floor deformities. Alveolar bone grafting benefits adult patients for the improvement of secondary nasal deformities post unilateral cleft lip repair.

Clinical and morphofunctional identity of the nasal SMAS.

The fascial system of the face (superficial musculo-aponeurotic system, SMAS) in the nasal part is a sustained layer that connects the nearby regions. In this paper, we aimed to emphasize the presence of SMAS in different areas of the nasal region: ala nasi, nasolabial fold, nasal dorsum and radix. We performed three studies (anatomical, histological, and radiological) to demonstrate the existence of nasal SMAS. The study group consisted of cadaveric analyses and retrospective analysis of the patient radiological data. The nasal SMAS was identified as a superficial fascia and a subcutaneous adipose layer. The anatomical dissection study together with histological and radiological evaluations demonstrated the presence of SMAS in the nasal region. We identified peculiarities of the nasal SMAS in two areas: in the ala nasi where it is thinner, and the deep part of the dermis does not adhere to the underlying structures and at the radix and dorsum nasi, where the adipose layer is very thin. The results of our research define nasal SMAS as a unit of great value in facial surgeries, such as facial rejuvenation, the resolution of malformations, or tumor removal.

What is the impact of miniscrew-assisted rapid palatal expansion on the midfacial soft tissues? A prospective three-dimensional stereophotogrammetry study.

OBJECTIVES: To evaluate the midfacial soft tissue changes of the face in patients treated with miniscrew-assisted rapid palatal expansion (MARPE). MATERIALS AND METHODS: 3D facial images and intra-oral scans (IOS) were obtained before expansion (T0), immediately after completion of expansion (T1), and 1 year after expansion (T2). The 3D images were superimposed and two 3D distance maps were generated to measure the midfacial soft tissue changes: immediate effects between timepoints T0 and T1 and overall effects between T0 and T2. Changes of the alar width were also measured and dental expansion was measured as the interpremolar width (IPW) on IOS. RESULTS: Twenty-nine patients (22 women, 7 men, mean age 25.9 years) were enrolled. The soft tissue in the regions of the nose, left of philtrum, right of philtrum, and upper lip tubercle demonstrated a statistically significant anterior movement of 0.30 mm, 0.93 mm, 0.74 mm, and 0.81 mm, respectively (p < 0.01) immediately after expansion (T0-T1). These changes persisted as an overall effect (T0-T2). The alar width initially increased by 1.59 mm, and then decreased by 0.08 mm after 1 year, but this effect was not significant. The IPW increased by 4.58 mm and remained stable 1 year later. There was no significant correlation between the increase in IPW and alar width (r = 0.35, p = 0.06). CONCLUSIONS: Our findings indicate that MARPE results in significant but small changes of the soft tissue in the peri-oral and nasal regions. However, the clinical importance of these findings is limited. CLINICAL RELEVANCE: MARPE is an effective treatment modality to expand the maxilla, incurring only minimal and clinically insignificant changes to the midfacial soft tissues.

Three-dimensional (3D) area and volume measurements for rhinoplasty.

BACKGROUND: Morphometric changes achieved in rhinoplasty are mostly analyzed on two-dimensional (2D) images. However, most of these alterations are amenable to three-dimensional (3D) analysis. OBJECTIVES: Objective measurements for rhinoplasty are currently done on 2D photographic analyses. We believe that newer techniques will develop. This is a study to help define new parameters. METHODS: Landmarks that are widely used in the literature were used to define the boundaries of these measurements. They comprised certain parts of the nose (tip, dorsum, radix, etc.). Measurements were done on a generic face (GF) 3D model. The model's nose was then morphed using the free, open-source 3D modeling software (Blender) to generate seven different deformed noses and to perform the area and volume measurements. RESULTS: Each nose with a different type of deformity demonstrated significant area and volume differences. For example, comparing area measurements to GF-Pleasant nose, GF-Snub nose showed a significant difference at the tip (43.3% reduction). Volume measurements were found to be mostly parallel to the area measurements; however, some incongruences were noted. CONCLUSIONS: We show that new area and volume measurements can be reliably developed for 3D-scanned images. These measurements can be utilized and will enrich the facial analysis and evaluation of the outcomes of rhinoplasty.

Preoperative computer imaging before augmentation rhinoplasty.

OBJECTIVE: In the present study, we investigated the efficacy of morphing technology via Adobe PhotoShop program and its "liquefy" effect in patients planned to undergo augmentation rhinoplasty. PATIENTS AND METHODS: The retrospective data for 100 consecutive augmentation rhinoplasty cases (64 females and 36 males) were enrolled in our study. Preoperative computer imaging (PCI) steps, a stepwise systematic guide for image editing, including (1) augmenting the dorsum, (2) lengthening the nose, (3) adjusting the tip projection, (4) perfection of the nasal dorsum and (5) exaggerating the tip projection and/or the dorsal augmentation were applied to the patients. After performing the PCI before augmentation rhinoplasty, the patients were allowed to see the options for the final appearance of their noses. Therefore, PCI helped them to decide on their operations. RESULTS: After applying CS-PCI before augmentation rhinoplasty, 71 patients (71%) accepted Step-4, and 19 (19%) accepted Step-3. Furthermore, six patients (6%) requested additional changes during their operational planning. In 95% of the cases, the authors achieved the results agreed upon based on the preoperative simulation. CONCLUSIONS: By PCI involving five steps for augmentation rhinoplasty, the patients were allowed to see the options for the final appearance of their noses. Therefore, PCI helped them to decide on their operations. With the help of morphing technology (2D), it is possible to increase interpersonal communication effectively.

Análisis de las Variaciones Anatómicas y Dimensionales del Canal Nasopalatino Mediante Tomografía Computarizada de Haz Cónico / Analysis of the Anatomical and Dimensional Variations of the Nasopalatine Canal by Cone Beam Computed Tomography

El conocimiento anatómico del canal nasopalatino (CNP) es fundamental para la realización de cirugías en el sector anterior del maxilar y así prever posibles complicaciones. El objetivo de este trabajo es evaluar y determinar las variaciones anatómicas y dimensionales del CNP según sexo, edad y estado dental. Este estudio transversal analizó un total de 251 imágenes de TCHC obtenidas de la base de datos del Servicio de Imagenología Oral y Maxilofacial de la Facultad de Odontología de la Universidad Andrés Bello, Viña del Mar, Chile. Para evaluar la asociación estadística entre variaciones del CNP con sexo, edad y estado dentario se realizó la prueba T de Student, chi-cuadrado y ANOVA (p0,05). Además, se detectó diferencia significativa entre el estado dentario y la dimensión de la tabla vestibular en relación con el CNP (p<0,01). Se deben considerar las variaciones de CNP para evitar posibles complicaciones durante los procedimientos quirúrgicos.

SUMMARY: Anatomical knowledge of the nasopalatine canal (PNC) is essential for performing surgeries in the anterior sector of the maxilla and thus anticipating possible complications. The objective of this work is to evaluate and determine the anatomical and dimensional variations of the CNP according to sex, age and dental status. This cross-sectional study analyzed a total of 251 CBCT images obtained from the database of the Oral and Maxillofacial Imaging Service of the Faculty of Dentistry of the Andrés Bello University, Viña del Mar, Chile. To evaluate the statistical association between CNP variations with sex, age and dental status, the Student's T test, chi-square and ANOVA (p0.05). In addition, a significant difference was detected between the dental state and the dimension of the vestibular table in relation to the CNP (p<0.01). CNP variations should be considered to avoid potential complications during surgical procedures.

Analysis of select esthetic nasal parameters in virtually planned orthognathic patients.

PURPOSE: Bony changes after orthognathic surgery are always followed by changes of the overlying soft tissues. Therefore, morphologic changes of the nose may be expected after procedures involving the maxilla. The purpose of this study was to evaluate the changes in the nasal region due to orthognathic surgery using computed tomography (CT) images of virtually planned patients. METHODS: 35 patients who underwent Le Fort I osteotomy, with or without bilateral sagittal split osteotomy, were included. 3D measurements on preoperative and postoperative images were performed and analyzed. RESULTS: The results revealed that aesthetically acceptable results can be achieved by orthognathic surgery alone. CONCLUSIONS: According to the results of this study, it can be concluded that it is best to reserve decisions on rhinoplasty to the post-orthognathic period.

An Innovative method for intraoperative guidance of nasal shape in rhinoplasty: Application of a convenient, sterilizable, patient-specific film model.

BACKGROUNDS: 3D simulation is increasingly used in rhinoplasty. However, during the operation, there is no tool to directly link the 3D simulation results with the intraoperative operation. Doctors rely on 3D simulation results only according to their intuition. Recently, the authors have discovered a simple, low-cost, and practical method for intraoperative assessment: a film model can be made according to the contour of the nose shape in its midsagittal view. The authors aimed to evaluate the effectiveness of the innovative method for intraoperative assessment of nasal shape in rhinoplasty. METHODS: Thirty-nine patients who underwent rhinoplasty for the first time between January 2019 and January 2021 were included in this study. All the patients confirmed ideal nasal shape based on preoperative three-dimensional photography (INOVA 3D-EX). In the guide group, procedures were based on guide of the film model and a picture of 3D simulation, and in the control group, procedures were performed based on the surgeon's intuition and a picture of 3D simulation. RESULTS: There were no statistical differences in basic data between the two groups before operation. Both groups showed a satisfactory correlation. Except for the columellar lobular angle, the ICC of nasal length, nasal depth, dorsum height, columella length, nasofrontal angle, nasorostral angle, and nasolabial angle were all stronger in the guide group than in the control group. CONCLUSION: This study demonstrates the usefulness of the nasal-shaped film model, which is made according to the contour of the nose shape in its midsagittal view. This approach is simple, low-cost, and practical.

Proboscis Lateralis With Basal Encephalocele: A Report of Clinical Management and Reconstructive Approach.

Proboscis lateralis is a rare craniofacial anomaly in which a rudimentary nasal appendage arises at the medial canthal area. The severity depends on organ involvement, including eyes, nose, cleft lip/palate, and/or concomitant intracranial anomalies. Here, we present a child with proboscis lateralis and associated trans-ethmoidal encephalocele. We suggest doing the preoperative CT and/or MRI to rule out associated intracranial anomalies and reliably preoperative planning tools. Moreover, we proposed an alternative nasal reconstructive technique using a composite graft from the proboscis mass at the same time as encephalocele repair with promising results.

A Clinical Report of the Complete Nasal Agenesis: Reconstruction of Congenital Arhinia and Review of the Literature.

Congenital absence of the nose or arhinia is an exceptionally rare craniofacial malformation, and the pathophysiology of the arhinia is still unknown. Most arhinia patients can have difficulties with breathing and feeding due to the absence of the nose, nasal cavities, and associated problems. A 38-day-old female patient was referred to our clinic with arhinia. Physical examination revealed the complete agenesis of nasal structures as the nasal bones and vestibulum nasi. The region of the absent nose was flat and firm at palpation. Congenital arhinia may occur with other associated malformations such as ocular, ear, palate, and gonadal. Therefore, it is recommended to evaluate computed tomography/magnetic resonance imaging in the postnatal period. Additionally, a radiological evaluation will help nasal reconstruction by documenting changes in nasal and maxillary anatomy over time. Due to the limited number of arhinia cases presented, the surgical management of this condition has not been standardized. We presented the pyramid-shaped cartilage grafts for the nasal framework and an expanded paramedian forehead flap for the skin coverage for reconstruction of arhinia.